System M+

System M+

System M+ offers control over every part of the door movement for light and heavy pivot doors.

ADA compliant System M+ variant

Adjustability for every pivot door

Fully adjustable door movement

Thanks to Damper Control, 30° Speed Control, and Latch Control, System M+’s movement is fully adjustable.

Proper latching

Latch Control ensures that doors with latching bolts always close properly. Ideal for exterior pivot doors.

Small to oversized doors

System M+ is suitable for light doors and heavy doors in a range of 80 kg to 500 kg for ultimate design freedom.

Self-closing

The System M pivot hinge is self-closing. This means that the door automatically moves towards the 0° position after being opened. The pivot door moves elegantly through the entire motion. Absolute control with FritsJurgens Inside.

Soft close

The soft close function in the System M makes the door move in a single fluent motion. Effortlessly and as soft as a whisper the door elegantly closes.

Wall protection

When a door fitted with the FritsJurgens System M pivot hinge is opened, the System M protects the door against touching the wall because of the opening damping. The hydraulic backcheck in the System M ensures the pivot door is slowed down strongly when reaching 70° to prevent touching the wall. The opening damping makes the door open elegantly.

Spatial Impact

A pivot door is a design statement with a large spatial impact. Therefore, the hinges are double acting, which means they open towards both sides. By simply keeping the door still at 0°, 90° or -90° the door will hold these positions, allowing you to determine the spatial impact of your pivot door.

With the touch of a finger

With just the touch of a finger, the door is set into motion. An effortless experience and a single fluent movement. Perfectly balanced.

Double acting

The System M pivot hinge is double acting. This means that the pivot doors can be opened and put into hold positions towards both sides. This gives you the freedom to determine the use of the pivot doors and the impact they have on the space.

Components

A pivot door needs various components – the pivot system, a floor plate, a ceiling plate, and a top pivot.

Click a component

Configure your own set

Top pivot

The top pivot is mounted into the top of the door. It uses a so-called pinhole connection, in which the pin is fixed to the top pivot and goes into the hole in the ceiling plate when the door is placed.

FritsJurgens offers two types of top pivots: Top pivot Regular and Top pivot Cable Grommet. Top pivot Cable Grommet is designed to enable easy wiring through the door for lighting or electronic security.

Bottom pivot

The bottom pivot is the pivot mechanism and driver of the pivot door and is fitted in the bottom side of the door. The pivot mechanism therefore is virtually invisible. FritsJurgens bottom pivots have a load bearing capacity for pivot doors up to 500 Kg.

The bottom pivot offers several features, depending on the choice of bottom pivot, such as: hold positions, self-closing, damper control, latch control, 30° speed control, free swing.
The bottom pivots placement determines the the spatial impact that thepivot door will have on its surroundings. Besides a more regular side placement to create pivot doors, FritsJurgens pivot hinges are also suitable for 360 degree rotating panels or walls.

Ceiling plate

The ceiling plate is fitted in the ceiling, where the pin of the top pivot seamlessly fits into the hole in the ceiling plate. The ceiling plate is available in two finishes: brushed stainless steel and black.

0 (224) 346 10 10

PİVOT SİYSTEM

System M+